Yacht Innovations

Unique Marine Product Manufacturer

Any Questions?  Call Us 7 Days A Week

9:00 a.m - 9:00 p.m. E.S.T.  516-480-3388

Please Call To Order 516-480-3388

AERE Inflatable Fenders

Fender Questions

 

What fender is right for my boat?

The choice of fender size and type is determined by many factors. However, due to the size, weight, and storage requirements of yesterday's fenders, the tendency to under fender your boat can now be corrected by the use of AERÉ Inflatable Fenders. Now you will be able to size your fender to your boat and not your storage locker.

 

The suggestions below are guidelines only. Each boat, every owner, and all the docking and rafting situations they will encounter are different. As such, the captain must take everything into account when considering the purchase of the proper fenders for their boat or yacht.

1. The size of the boat, length and beam.

2. The type of boat.

3. The weight and displacement of the boat.

4. Can my crew or family members safely deploy and move the fenders when necessary?

5. What is the surface area of the boat that is presented to the wind? (Most sailboats present less wind surface than most powerboats.)

6. What is the draft of the boat?  (A deep draft boat will be more affected by currents and a shallow draft will be more affected by wind).

7. The currents and tidal action where the boat will be docked.

8. The type of facilities, or lack of, where the boat will be docked.

9. Any rafting situations the boat may encounter.

10. The need or desire to increase the available storage space on the boat.

AERÉ Inflatable Fenders are available over 40 sizes, models, and types. They are in daily use on vessels from 17 feet long to over 500 feet long. You will be able to find a model and color that will serve your particular needs.

 

Use the following table as a guideline only. Lightweight boats and most sailboats can go one size smaller, heavy boats and high profile boats may go one or more sizes larger. If inflated size is a problem in your slip, use the Commercial duty model, but go one size smaller.

Frequently Asked Questions

 

The below FAQs are designed to provide a better understanding of our products and our business. They provide basic information, sometimes about fairly complex topics. If you have any questions that are not covered here or elsewhere on our website, please contact us through the form on our contact us page.

Remember, you can never be too well protected, but it’s easy to be under protected and end up with damage that could have been prevented with fenders of a sufficient size and strength. The price of proper fendering is a very small percentage of the price of a boat or yacht, and the one time they protect your boat from damage will pay for the cost of fenders many times over.

 

Will my fender pop is my boat slams up against it really hard?

 

While it is possible to pop a fender, it is quite difficult. Our fenders have been through major storms and even several hurricanes without damage.

The normal operating pressure for an AERÉ Inflatable Fender is 1 psi internal pressure. They have been pressure tested to over 45 psi.

 

Help! My fender got too soft in the cold/too hard in the sun. Why?

 

All inflatables get harder in direct sun and hot weather and get softer in rain or cooler weather. This is normal.

 

For example, heat will increase the pressure inside an inflatable by .03 psi per one degree of temperature increase. Effectively, a 33 degree increase in temperature can make a hard inflatable extremely hard or a soft one much harder. This also works in reverse and a hard inflatable will soften if the temperature drops by that amount. Humidity also has a slight impact on the changes. It is normal, and good practice, to adjust the pressure in your inflatable product as the weather changes.

 

How Are the AERÉ Fenders Constructed?

 

AERÉ Inflatable Fenders are made from heavy, high denier, polyester fabric (used in dingy construction), and heavily PVC coated inside and outside. The product is hand glued with seam reinforcement inside and outside. The seams are from three to four layers thick to assure seam integrity. The attachment points are stainless steel “D” rings on both ends, securely fastened with Kevlar thread to a layered backing plate. The fill valves are selected to assure tight seals and rapid inflation and deflation.

 

How Puncture and Abrasion Resistant Are AERÉ Fenders?

 

Any fender, no matter what it’s made from, can be punctured or abraded. AERÉ Inflatable Fenders absorb a tremendous amount of punishment before failure; as is reflected in our product warranty. They will withstand very high compression loads that will collapse a normal vinyl fender, leaving you with very little between your boat and damage. Normal care should be taken in fender placement (if you see a sharpened spike or nail sticking out of the dock or piling, don’t put any fender there if avoidable) and they will last a very long time.

 

What About UV Protection?

 

The AERÉ Inflatable Fenders have built-in UV protection. We have tested fenders in Florida and the Caribbean without failure or color fading.

 

Can AERÉ Inflatable Fenders be repaired if punctured?

 

AERÉ Inflatable Fenders can be easily and quickly repaired by non-professionals with readily obtainable glue and patches. However, as part of our Product Warranty program, we will repair AERÉ Inflatable Fenders in our Florida location or they may be sent to one of our certified service centers in our dealer network.

 

What is your Product Warranty?

 

AERÉ Inflatable Fenders covered under an unconditional warranty for the first year of ownership from date of purchase and AERÉ Docking Solutions warrants that its products are free of manufacturer’s defects for an additional 2 years from date of purchase.  During this 3-year period, AERÉ Inflatable Fenders may be returned to the factory and will be repaired at no charge to the owner.

New in 2013:  We have changed our warranty to create the six year warranty program.  The best in the industry, we still have our first year unconditional warranty.  For the next three years, we warrant that our products are free from manufacturer's defects.  During this FOUR year period, AERÉ Inflatable fenders may be returned to the factory and will be repaired at no charge to the owner.  The final two years of the warranty program are a 20% discount on a replacement fender for any damaged and unrepairable fender.  During this period, and beyond, we will always attempt a repair on the fender first, and charge a $50, $75, or $100 flat rate repair charge, dependant on the size of the fender, only if the fender can be repaired.

 

 

Air Pump Questions

 

What is air volume and pressure?

 

There are two basic types of pumps. High volume/low pressure and low pressure/high volume. AERÉ Inflatable Fenders require high volume/low pressure pumps; these are available when you purchase your AERÉ fenders or at your local marine store.

 

Which air pump should I use?

 

Any of the AERÉ Inflatable Fenders can be inflated up by either a foot or canister pump. Our smallest fenders (12” x 29”) can be inflated to 1 psi of air pressure with our least expensive foot pump in 15 - 30 seconds. We recommend our higher volume foot pumps for our larger fenders up to 18” x 58”. Eighteen-inch fenders take about 2 minutes with the manual pump and less than a minute with a high volume electric pump. For our larger fenders, use electric pumps, particularly the high volume units are desirable, but not required. Our largest fenders can be inflated in about 2 minutes with a high volume electric pump.

 

What is "psi"?

 

This stands for "pounds per square inch." It is a unit by which air pressure is measured.

 

Do I need an air gauge for an AERÉ Inflatable Fender?

 

AERÉ Inflatable Fenders use only 1 psi of air pressure and can, due to compression, withstand pressures many times that. A gauge is not needed for your AERÉ fenders. As a rule of thumb, 1 psi of pressure in an AERÉ Inflatable Fender feels like a soft grapefruit if you squeeze it with your full hand.

 

How fast will this inflate?

 

Pump speeds, rated in flow rate in either LPM (Liters Per Minute) or GPM (Gallons Per Minute) gives you an idea of how fast a particular item will fill up. The higher the volume the faster it will blow up. However, the amount of pressure needed (only 1 pound for the AERÉ Fenders and 3 pounds for most dinghies) will change the amount of time needed. Higher pressure requires more time and more effort on the part of the pump.

 

 

Other Questions

 

Does anyone else sell these products?

 

AERÉ Inflatable Fenders are sold by a select number of marine product dealers and luxury yacht outfitters. They can also be purchased directly from our company; through our web site or at boat shows where we exhibit. See our Dealer page and Exhibit Schedule for more information.

 

Where can I see your products in person?

 

In order to hold down our costs we do not have a storefront or retail location. Our fenders are becoming more visible on many yachts and boats throughout the USA and in Europe. We exhibit at major boat shows in the U.S., and special offers are available only at the shows.  Many of our Dealers have a retail location where you can see our products.

 

Can I come visit your office?

 

Customers are welcome to come visit our manufacturing facility and speak to us.  Please call ahead to schedule an appointment and we would be happy to have you.

Bravo OV4

 

The Bravo OV4 is the newest addition to our current line of air pumps and inflators. This electric pump will get power from any 110v outlet. With an output of 950 liters per minute, it can inflate anything you need up to a maximum pressure of 2.2psi. Designed as a perfect mid-range pump, the OV4 will perform any task need. A great solution for anyone with access to an AC outlet. Comes with a universal fill adapter for all you inflation needs.

 

Bravo LPM 500

 

A.C. inflator/deflator 110/115VAC. High speed inflation or deflation, it pumps 1100 LPM and reaches a pressure up to 2.7 PSI. This is a great high speed pump if you have access to a 110 volt or 220 volt outlet. The revolving "handle" system keeps the air flow constant, thus improving the motor cooling (even when inflating objects equipped with small valves). Due to the popularity of this inflator, we have added a 220 Volt model for those boats that have 220 vac available.

 

Bravo 10 High Pressure Foot Pump

 

The BRAVO 10 HP double chamber pump easily inflates all fabric or rubberized boats, including high pressure floors. It is also fantastic for inflatable those water toys, air mats, floats, etc. The BRAVO 10 HP foot pump is specifically designed to provide the higher pressures that inflatable floors require. It has 4 anti-slip feet for greater stability and is constructed from heavy duty components.

 

Bravo OV10

DIDA-4 Magic Inflator

The Bravo OV10 is a new addition to our current line of air pumps and inflators, this electric pump will get power from any 110v outlet. With an output of 1700 liters per minute, it can inflate anything you need in seconds up to a pressure of 3.6psi. It even has a sand filter included to prevent clogs when inflating your products on the beach. A great solution for anyone with access to an AC outlet. Comes with a universal fill adapter for all you inflation needs.

 

The return of our most requested air pump. The DIDA-4 has high volume air power for rapid inflation or deflation of large inflatables. Excellent for commercial use --Locates air leaks quickly. 4 Peak Horsepower, 130 CFM, 12 foot grounded cord, 6 foot hose, up to 3.25 PSI. Perfect for those inflatables that require 3 PSI.

 

Copyright © 2015 Yacht Innovations Inc. All rights reserved.

Testimonials

Contact Us

Policies